Knowledgebase: European Pocket Bikes
Blata Retro Style 60
Posted by Scott S. on 12 October 2010 04:03 PM

The Blata Retro Style 60 is manufactured by Czech Republic's Blata Corportion. It is a high-end pocket bike with the same engine as the Blata 2.5 and is most suitable for beginners and children (when supervised). It MSRP's for $999. The frame is actually identical to the Blata 2.5 minibike, and only the body panels are different, giving it the unique, old-school look.

Status: limited availability in the U.S (as of August 2010).

The Retro 60 is currently available in limited quantities in the U.S. and can be imported upon request. If you are interested in purchasing one, please enquire.

 

Blata Retro 60 Minibike spec sheet
Blata Retro Style 60 Minibike Red Engine: Air cooled two cycle single cylinder
Displacement: 39.9cc
Power: 2.5 kW at 8,700 RPM (3.4 HP)
Torque:

3.5 Nm at 6,000 RPM (2.9 ft-lb)

Carburetor: Dell'Orto 14
Ignition: Magneto
Starting: Pull start
Clutch: Centrifugal automatic
Frame: High tensile steel tubing (welded)
Brakes:  Front & rear 119mm disc 
Wheels:

Front light alloy 4" - 51

Rear light allow 4" - 95 

 Tires: Front 3.00 - 4" 
  Rear 3.00 - 4" 
Fuel:  92+ Octane + 2-stroke synthetic oil (50:1) 
Fuel tank:  1 L (0.26 gal)
Weight:

Net 16.8 kg (37 lbs)

Packaged 20.8 kg (46 lbs)

Maximum Load:  110 kg (242 lbs) 
Dimensions: 

940mm x 500 mm x 540 mm (LxWxH)

37" x 19.7" x 21.3" (LxWxH)

Package Dimensions:

99 cm x 35 cm x 57 cm (LxWxH)

38.9" x 13.8" x 22.4" (LxWxH) 

(4 votes)
This article was helpful
This article was not helpful

Comments (0)
Post a new comment 
 
Full Name:
Email:
Comments:
Help Desk Software by Kayako Fusion